产品资料
产品[

ASKER橡胶硬度计

]资料
如果您对该产品感兴趣的话,可以 产品名称: ASKER橡胶硬度计
产品型号: C2
产品展商: ASKER
关注指数:831
产品文档: 无相关文档

简单介绍
ASKER橡胶硬度计测量硬度的基本因素之一是确定不同橡胶、人造橡胶及塑料制品的特性。适合特点的设计,所有的硬度计的生产及校准都是在专业人员的严格控制下进行的,可以保证并符合国内及国际标准.上海腾明工贸有限公司代理日本高分子ASKER橡胶硬度计中国总代理.产品库存量大.技术**.提供五年质量保证及所有零配件及维修服务

ASKER橡胶硬度计的详细介绍


ASKER橡胶硬度计的详细介绍

ASKERDurometer Type C2
ASKER
ASKER

The ASKER Durometer TypeC2 for soft rubber, sponges, and other foam elastomers, as well asrolled-threads (yarn packages), etc. It is suitable for softmaterials difficult to measure using the ASKER TypeC.
ASKER
ASKERFeatures
ASKERASKER橡胶硬度计
Indentor
ASKERHeight: 2.54mm Shape:Spherical
ASKER
Pressure foot
ASKERThe Pressure foot in contact with thespecimen is 44mm in width and 18mm in depth, wide enough to ensureaccurate measurement. The Longer Pressure Foot Type (C2L type)is applicable for measurement of narrow or concavespecimens.
ASKER橡胶硬度计
ASKER
Hardness TesterSelection Chart
ASKER
ASKER
Our product line consists of varioustypes of durometers applicable to specific materials
as indicated in the chart above.

Type A Durometer (ASKER A type), conforming to JIS K 6235 is themost popular type of durometer for measuring rubber hardness.

However, verification is recommended because a significantdifference is estimated to be the largest when a durometerindicates measurement values from 10 to 90 points.

For hard specimens for which Type A Durometer readings indicatemore than 90 points, measurements should be undertaken using theType D Durometer (ASKER D type). However, for soft specimens withmeasurements of less than 20 points, the ASKER C type or Type EDurometer (ASKER E type) should be used. The most importantconsideration in using durometers is to select the correct type forpurposes of measurement according to the specimen.
ASKER橡胶硬度计
ASKERSpecification
ASKER
ASKER
IndicationrangeASKER0 point - 100 point (262 degree dialscale)
ASKER
MinimumindicationASKER1 point (Accuracy : ±1 point)
ASKER
Indentor Design(mm)ASKERHeight: 2.54 5.08 Dia. Spherical
ASKER
Spring Forces[mN(g)]ASKER
0 point:539(55)
ASKER
ASKER
ASKER
100 point:4460(455)
ASKER
Central hole ofdiameter of Pressure footASKERΦ5.5
ASKER橡胶硬度计
ASKER
Pressurefoot
Dimension (mm)
ASKER44×18(Rectangular)
ASKER
Outer Dimension(mm)ASKERApprox. Width 57×Depth 30×Height 76
ASKER
Weight(g)ASKER200
ASKER
ApplicationASKERsoft rubber, urethane foam, sponge,rolled-threads, film rolls and pottery clay
ASKER
ASKEROuter Dimension(mm)
ASKER
ASKER
A custom designed pressure foot durometer is availableaccording to specimen conditions.
ASKER橡胶硬度计
ASKEROption
ASKER
ASKER ASKERTwo-pointer type (max-hand andactive hand) of Rubber Hardness Tester
The stationary set hand (max-hand) makes the maximum value easierto read and allows the creep characteristics of a specimen.

Accurate measurement is made possible for specimens* for whichstress relaxation occurs over time or for specimens for which it isdifficult to take readings from the front.

*Materials for which the reading decreases immediately after theindentor has been pressed against the surface.
ASKER
ASKER ASKERConstant Loader forDurometer
·Constant loarder assures uniform test pressure eliminatingfalse readings due to differences between operators in measuring byhand.
·High accuracy and repeatability of the hardness readings areassured by the flexible joint function.
ASKER
ASKER ASKERIndentor ExtensionTe
ster
·The gauge to check the indentor height on a durometer and thereading indicator mechanism.
·Inspection is conducted at 2, 50, and 100 pointsrespectively
ASKER橡胶硬度计


ASKER
ASKER橡胶硬度计
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

上海腾明工贸有限公司 电话: 021-33311761 传真:021-62673493  联系人曾烁:13601658183  地址:上海市黄浦区云南南路180号716室