产品[
ASKER橡胶硬度计
]资料
如果您对该产品感兴趣的话,可以
产品名称:
ASKER橡胶硬度计
产品型号:
AL
产品展商:
ASKER
关注指数:1241
产品文档:
无相关文档
简单介绍
ASKER橡胶硬度计上海腾明工贸有限公司 联系电话：021-62179116传真电话：021-62673493http://www.tmdprecise.cn DET:13917634437
ASKER橡胶硬度计的详细介绍
| ASKER橡胶硬度计 | | | ASKER'S TYPE | 依据标准 | 应用 | C | SRIS 0101 | 海绵、软橡胶、瓷土、硬发泡橡胶、绕线盘 | C2 | -- | 软海绵（一般用于比C型软的材料） | JA | JIS K 6301 A | 一般橡胶 | A | JIS K 6253A，ASTM D 2240 A | 一般橡胶 | B | ASTM D 2240 B | 半硬橡校、瓷土 | JC | JIS K 6301 C | 半硬橡校、软塑料 | D | JIS K 6253 D，ASTM D 2240 D | 硬橡胶、硬塑料 | JAL | JIS K 6301 A | 一般橡胶（凹进部位） | F | -- | 软发泡塑料、发泡橡胶 | FP | -- | 化妆用粉扑 | CS | -- | 笨已烯发泡 | C1L | SRIS 0101 | 海绵、软橡胶（凹进部位） | C2L | -- | 软海绵（凹进部位） | C3 | -- | 硬发泡状橡胶 | AL | JIS K 6253 A，ASTM D 2240 A | 一般橡胶（凹进部位） | DL | JIS K 6253 D，ASTM D 2240 D | 硬橡胶（凹进部位） | BL | ASTM D 2240 B | 半硬橡胶（凹进部位） |
ASKER橡胶硬度计 ASKER橡胶硬度计 ASKER橡胶硬度计的详细介绍 ASKERDurometer Type C2 |
| 
|
The ASKER Durometer TypeC2 for soft rubber, sponges, and other foam elastomers, as well asrolled-threads (yarn packages), etc. It is suitable for softmaterials difficult to measure using the ASKER TypeC.ASKER橡胶硬度计
|
|
| |
| IndentorASKER橡胶硬度计 | 
| HeighASKER橡胶硬度计t: 2.54mm Shape:Spherical |
|
| Pressure foot | 
| The Pressure foot in contact with thespecimen is 44mm in width and 18mm in depth, wide enough to ensureaccurate measurement. The Longer Pressure Foot Type (C2L type)is applicable for measurement of narrow or concavespecimens.ASKER橡胶硬度计 |
|
| Hardness TesterSelection Chart | 
|
| Our product line consists of varioustypes of durometers applicable to specific materials
as indicated in the chart above.
ASKER橡胶硬度计
Type A Durometer (ASKER A type), conforming to JIS K 6235 is themost popular type of durometer for measuring rubber hardness.
However, verification is recommended because a significantdifference is estimated to be the largest when a durometerindicates measurement values from 10 to 90 points.
ASKER橡胶硬度计
For hard specimens for which Type A Durometer readings indicatemore than 90 points, measurements should be undertaken using theType D Durometer (ASKER D type). However, for soft specimens withmeasurements of less than 20 points, the ASKER C type or Type EDurometer (ASKER E type) should be used. The most importantconsideration in using durometers is to select the correct type forpurposes of measurement according to the specimen. |
| |
|
| Indicationrange |
| 0 point - 100 point (262 degree dialscale) |
|
| Minimumindication |
| 1 point (Accuracy : ±1 point) |
|
| Indentor Design(mm) |
| Height: 2.54 5.08 Dia. SphericalASKER橡胶硬度计 |
|
| |
| Central hole ofdiameter of Pressure foot |
| Φ5.5 |
|
| Pressurefoot
Dimension (mm) |
| 44×18(Rectangular) |
|
| Outer Dimension(mm) |
| Approx. Width 57×Depth 30×Height 76 |
|
| |
| Application |
| soft rubber, urethane foam, sponge,rolled-threads, film rolls and pottery clayASKER橡胶硬度计 |
|
|
| ASKER橡胶硬度计 | Outer Dimension(mm)<, /o:p> |
| 
| A custom designed pressure foot durometer is availableaccording to specimen conditions. |
| |
| 
| |
| Two-pointer type (max-hand andactive hand) of Rubber Hardness Tester
The stationary set hand (max-hand) makes the maximum value easierto read and allows the creep characteristics of a specimen.
Accurate measurement is made possible for specimens* for whichstress relaxation occurs over time or for specimens for which it isdifficult to take readings from the front.
*Materials for which the reading decreases immediately after theindentor has been pressed against the surface. |
|
|
| |
| Constant Loader forDurometerASKER橡胶硬度计 · | Constant loarder assures uniform test pressure eliminatingfalse readings due to differences between operators in measuring byhand. | · | High accuracy and repeatability of the hardness readings areassured by the flexible joint function. |
|
|
| 
| |
| Indentor ExtensionTeASKER橡胶硬度计
ster · | The gauge to check the indentor height on a durometer and thereading indicator mechanism. | · | Inspection is conducted at 2, 50, and 100 pointsrespectively |
|
|
|
|
|
|
|
|
|
